Detcon 700 Series Remote Sensor/Alarm Relay Module With H Instrukcja Użytkownika Pobierz pdf (Strona 5)

700 HART-RAM I.M.

1. Introduction

1.1 Description

The Model 700 Remote Sensor/Alarm Relay Module with HART Interface (known as the HART Remote

Alarm Module or HART-RAM) is sold separately as an accessory for Model 700 Series Gas Sensors. It is a

universal design and can be used with any of the Model 700 Gas Sensors. The HART-RAM is provided in

an explosion-proof junction box constructed of either epoxy-painted aluminum or 316 stainless steel and

includes a glass-viewing window.

Figure 1 700 HART-RAM

The HART-RAM performs three functions: 1) The first function is to set gas alarm levels and to configure

the three local relay contacts. 2) The second function is to provide a HART Interface to the Model 700 Gas

Sensor 3) The third function is to operate a Model 700 Gas Sensor remotely. The remote sensor function is

typically used when the sensor must be mounted in a position where it cannot be viewed or accessed readily.

All three functions can be used at the same time.

1.2 Installation

The HART-RAM can be installed as a wall mount or pipe mount using the mounting holes of the explosion-

proof junction box. It should be oriented such that the LED display is horizontal. If the 700 Gas Sensor is

mounted directly to the HART-RAM, use 0.5” spacers underneath the mounting holes to provide access

clearance for the 700 Gas Sensor (Figure 3).

NOTE: Block any unused ¾” NPT holes with the proper Plug. (Detcon P/N 8522-750)

HART-RAM I.M. Rev. 0.0 Page 1 of 24

1 2 3 4 5 6 7 8 9 10 ... 27 28

Brak uwag

Detcon 700 Series Remote Sensor/Alarm Relay Module With H Instrukcja Użytkownika Strona 5