Detcon 240 Instrukcja Obsługi Pobierz pdf (Strona 11)

Sentinel CX

Sentinel CX Sensor Station IM Rev. 1.2 Page 7 of 7

Sensor Connector Ratings

Voltage: 9-11.2 VDC

Current: 2 Amps max through single relay connector (2 Amps max total across 4 connectors.

CAUTION

When utilizing ‘Wet’ contacts, the maximum power that can be drawn by the

annunciators is 2A.

The Smart Wireless® CXT is also available with ‘Dry’ relay contacts (Figure 7). Dry relay Contacts allow

the user to control annunciators that operate off an exterior power source that relies on the controller to

provide only contact closure to apply voltage to the annunciator. The relays are rated for 10A @

30VDC/250VAC. It is important to note that the ‘Dry’ contact feature utilizes a common return for all

annunciators.

Relay PCA

COM

FAULT

COM

ALARM 3

COM

ALARM 2

COM

ALARM 1

Enclosure

ALARM 2 (Green) 3

Alarm Connector

(Pin 2 is not used)

ALARM 3 (Orange) 4

FAULT (Blue) 6

ALARM 1 (White) 1

COM (Black) 5

Figure 7 External Alarm Connector Pin out for ‘Dry’ alarm contacts

1.8 Power Switch

Power to the SmartWireless CX is controlled by a power switch located on the bottom of the enclosure

(Figure 1). Pressing this switch while the power is off will turn the CX on. Pressing the switch while the

power is on will turn the power off. When the power to the CX is on, the green LED indicator on top of the

enclosure will be illuminated.

1.9 Power Connector

The internal battery inside the SmartWireless® CXT controller can be recharged by connecting 24VDC to

the power connector on the side of the enclosure (Figure 1). A VAC/24VDC battery charging adapter is

included with every CX.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Brak uwag

Detcon 240 Instrukcja Obsługi Strona 11